Precise Cutters

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Punch & Dye Cutter-Circular is used for accurate and rapid preparation of paper and paperboard samples without any deformation and damage. Punch & Dye cutters are designed to eliminate the causes of errors associated with hand-cut samples.

 

Specification:

·         Sample Area: 100cm²

·         Operation:  Manual

·         Application:  Sheet Punch

Additional Information:

• Item Code: GEC-P40203-C
• Delivery Time: 3-4 WEEKS

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of
Punch & Dye Cutter (Guillotine Type) is used for accurate and rapid preparation of paper and paperboard samples without any deformation and damage. Punch & Dye cutters are designed to eliminate the causes of errors associated with hand-cut samples.

The accuracy of test results is not only dependent on the accuracy with which the procedure is carried out, but also on the accuracy of cutting the test pieces (specimens) from the original sample.

Specification:

·         Sample Area : A4

·         Operation: Pneumatic –Automatic

·         Application: Sheet Punch

Additional Information:

• Item Code: GEC-P40203-D

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Punch & Dye Cutter is used for accurate and rapid preparation of test pieces for use in tensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests without any deformation and damage. Punch & Dye cutters are designed to eliminate the causes of errors associated with hand-cut samples. The accuracy of test results is not only dependent on the accuracy with which the procedure is carried out, but also on the accuracy of cutting the test pieces (specimens) from the original sample.

Specification:

·         Sample Area: 300 * 15 mm/100*15 mm/200 *25 mm  (L * W)

·         Operation:  Manual

·         Application:  Tensile Strength Tester/Folding Tester/Ply Bond Tester

Additional Information:

• Item Code: GEC-P40203-A

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Manual Screw Press 
Specifications

•         Product Type: Screw Press

•         Height: 4750 Millimeter (mm)

•         Length: 294 Inch (in)

•         Color: Sky Blue

•         Voltage: 380 Volt (v)

Additional Information:

• Item Code: GEC-P40904

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Calendar Machine is widely used for calendaring the wrinkles of the papers that are caused due to sundry on wet papers. This is designed for removing the paper wrinkles effectively and makes the paper smooth. It can easily work on 10 to12 sheets at one time.

Additional Information:

• Item Code: GEC-P40903

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Circular Cutter (Hand Wheel Type) is a manually operated cutter with four knives along the perimeter. The accuracy of the tests results is not only dependent on the accuracy with which the procedure is carried out, but also on the accuracy of cutting the test pieces from the original sample.

 

Specification:

·         Sample Area: 50cm²/100 cm²/150 cm²/200 cm²

·         Thickness: Maximum 5 mm

·         Application:  Circular sample

Additional Information:

• Item Code: GEC-P40201-B

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Rag Chopper. The Machine is used to cut the Rags into small pieces up to ½ x1 length and the Machine is suitable for cutting the Rags PARTICULARS OF RAGS CHOPPER ARE AS UNDER:- BODY: M.S. Fabricated Body ROTOR: Fabricated Rotor suitable for the Knife. M.S. Shaft fitted with bearing and Plumber Block. M. S. ROLL: Drive Rolls and Discharge Conveyor. PULLEY: The Pulley contains V- Section belt drive & other place Flywheel is fitted

Additional Information:

• Item Code: GEC-P40905

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Precision sample strip cutter is used for accurate and rapid preparation of test pieces for use in tensile strength tests, folding endurance test, water absorbency test and other similar tests without any deformation and damage

Additional Information:

• Item Code: GEC-P40201-A