Laboratory Equipments

Product Details:

For faster drying and conditioning the hand sheet after pressing. The hot air passes through the holes in the drying ring to dry and without effecting the surface of the hand sheets.

Specification:

·         Heating Chamber: Double Jacked Thermally Insulated Container with easy opening

·         Autoclaves: Six in Nos. & capacity 2.5 liter & suitable for 300-350 g bone dry wood rotating in a polyglycol bath

·         Heating Elements: 2 Nos. 7.5 Kw each with Thermostat Control

·         Temperature Control Range: 50-3500C

·         Maximum Working Pressure: 20kg/cm2

·         Test Pressure: 20kg/cm2

·         Drum Rotation: 2.8 RPM

·         Normal Working Temperature: 1700c

·         Glycol Volume Required: 90 Liter

·         Chemical Recovery: Glycol Recovery System Using Chimney with Cooling Water Recirculation

·         Power Supply: 440 Three Phase 15 KW

Additional Information:

• Item Code: GEC-P40314
• Production Capacity: 10
• Delivery Time: 10-15 WEEKS
• Packaging Details: WOODEN STANDARD EXPORT PACKAGING

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Water Absorption Tester is designed to measure the degree of water absorption of paper i.e. the capillary rise in millimeters by suspending a specimen in a vat filled with water.

Specification:  

•      Scale Range:   0 - 150 mm

•      1 div:  1 mm

•      Number of specimen holders:  4

•      Specimen Size:   15 X 200 mm.

•      Size of water bath:  270 X 80 X 26 mm.

•      Water Temperature:  15 - 20º C

Additional Information:

• Item Code: GEC-P40122

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Rapid Sheet Dryer is used for rapid drying of hand sheets after pressing, prior to evaluation. The uniformly distributed heat from the drying surface reduces the moisture content of paper samples. Rapid Dryer is intended for shortening the drying time of wet pulp or paper samples before determining the dry weight or moisture content. 

Specification:

•         Sheet size: Max width 250 mm and Max length 300 mm.

•         Temperature Range: Maximum 180oC± 10oC

•         Heaters: Flat electrical Elements single phase, 220 V, 400 W each for upper & lower plats.

•          Power supply/ Consumption: 220 V, Single phase, 50 Hz/800 W

Additional Information:

• Item Code: GEC-P40304
• Production Capacity: 5
• Delivery Time: 5-10 weeks
• Packaging Details: wooden standard export packing

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Wood Chip Classifier
It is used for rapid, reproducible and accurate classification of wood chips in respect to size and thickness by using standard size screening trays mounted on a shaking mechanism with specified frequency.

Specification:

•         Sample size: 8 - 10 liters

•         Recommended dry content: 40 - 70%

•         Screening time: 10 minutes

•         Shaking frequency: 2.7 Hz

•         Stroke: 120 mm

•         Power Consumption: 1 KW

•         Power Supply: 400 V, 50 Hz

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Melt Flow Indexers are used to measure the melt mass-flow rate (MFR), melt volume-flow rate (MVR), as well as Melt density of a wide range of thermoplastic raw materials, polycarbonate, fluoro plastics, as well as polyethylene, polypropylene, ABS, POM etc.

Specifications:

•         Temperature accuracy: ±0.1°c.

•         100g piston weight to equal ASTM weight requirement

•         Temperature range: Up to 400°c. Least count 0.1

•         Applied weight: manual

•         Main electrical supply: single phase

Additional Information:

• Item Code: GEC-P40416

Product Details:

PID based temperature controller with auto-tune facility. It measures the melt characteristics of thermoplastic polymers. Such as melt volume rate and melt density

Specifications:

•      Temperature accuracy: ±0.5°c.

•      Temperature range: up to 400°c., Timer: Least count 0.1.

•      Temperature Digital timer Range up to 999.9 min/ 999.9 sec

•      Controller: Range up to 4000C resolution of 0.10C.

•      Specimen Weighing: Automatic up to 60 gm and resolution of 1 mg

•      Specimen cutting: Motorized.

•      Weights: 1.2 kg, 2.16 kg, 3.8 kg, 5 kg & 21.6 kg weights

Additional Information:

• Item Code: GEC-P40417

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Digital Total Dissolve Solid (TDS) Meter is reliable and accurate test instrument for measurement of TDS of aqueous solutions. It measures Conductivity in five ranges. The resolution is 0.1 ppm respectively, in the lowest range. The cell constant is flashed on a digital display & can be adjusted from the front panel. The instruments have the "Check" facility to calibrate the instruments.

Specification:

·         Display: 3½ Digit LED

·         Measurement: TDS

·         Ranges: 0 to 200 ppm, 0 to 2.000 ppt, 0 to 20.00 ppt, 0 to 200.00 ppt, 0 to 1000 ppt

·         Accuracy: ± 2% FS ± 1 Digit

·         Temp. Compensation: Manual: 0 to 50ºC

·         Cell Constant: Adjustable on Digital Display

·         Measuring Cell: Platinum DIP Type

·         Resolution: 0.1 ppm, Sensor: T.D.S. Cell 

Additional Information:

• Item Code: GEC-P40606

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Color Matching Cabinet Spectrum is highly recommended for laboratories and industries where it is important to maintain color consistency and quality. The equipment provides a standardized environment for evaluation and visual assessment of color. Fitted with Electronics Chokes for instant illumination.

Specification:

·         D65 – Artificial daylight – 2 Nos.

·         INC AA – Incandescent Light – 4Nos.

·         TL 84 Light – Point Scale – 1No.

·         UVB Light - Ultra Violet – 1 No.

·         CWF Light –Cool White Florescent – 1No.

·         UL 30 Light – Ultra Loom 30 – 1 No.

·         Angle of viewing booth – 45 degree

·         Viewing Booth Material – Wood or Steel

·         Time Totalizer – upto 99999.9 hours

Additional Information:

• Item Code: GEC-P40615

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Salt Spray (Fog) Tester has been designed to assess the ability of rust proofed components to withstand corrosion due to atmospheric conditions.

Specification:

·         Temperature Range: Ambient to 45^oC

·         Temperature Accuracy +/- 2^oC

·         Temperature Control: Solid State Digital Programmable Temperature Controller cum Indicator with special zero corrosion PT 100 Sensor

·         Air Regulator: A moisture cum oil filter and air regulator ranging from 0 to

30 psi is provided.

·         Construction: FRP–Fiber Reinforced Plastic

Additional Information:

• Item Code: GEC-P40421

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Rotary Digester is designed for producing pulp from various fibrous materials under specified and control condition under pressure, temperature and time. It produces pulp in a manner similar to a commercial digester.

Specification:

·         Capacity: 25 Liter, Type: Round Cylindrical

·         Digester Body: Made of Acid proof steel

·         Raw Material: 3.0 kg. Wood chip

·         Temp: 50 – 250^oC, Max. Pressure: 15.0 Kg. / cm2

·         Rotation Angle: 360^o Center, Total Power: 11 KW

·         Motor Rating: 3 Phase, 440 V, 1/2 HP

·         Read Out: 3-1/2 Digits, Resolving Power: 0.01 Ph. 1MV

·         Measuring Range: 0.14 Ph. –1999±1999 MV

Standards:

TAPPI, SCAN, ISO

Additional Information:

• Item Code: GEC-P40306

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Dissolved Oxygen Meter for Laboratories Features: Extended range up to 300%. Extended altitude compensation to 4000m, extended salinity compensation to 40 g/L .Automatic calibration in air PC compatible Data logging and storage of up to 8000 samples.

Specification:

•      Range: (DO) 0.00 to 4 5.00 ppm (mg/L), (%Saturation O2) 0.0 to 300.0%, (Temp) 0.0 to 50.0°C

•      Resolution: (DO) 0.01 ppm (mg/L), (%Saturation O2) 0.1%, (Temp) 0.1°C

•      Accuracy (@20°C/68°F): (DO) ±1.5%F.S., (@20°C/68°F): (%Saturation O2) ±1.5%F.S., (@20°C/68°F): (Temp) ±0.5°C

•      Environment: 0 to 50°C; RH 95%

•      PC Connection: RS232 serial port (opto-isolated)

•      Temperature Compensation: automatic, 0.0 to 50.0°C

•      DO Calibration: automatic, 1 or 2 points at 0%(with HI 7040 solution) and 100%(in air)

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Water Bath
Our microprocessor-controlled Thermos Scientific water baths provide superior temperature uniformity for your specific applications and offer unique features such as a seamless-stainless steel interior chamber and epoxy-coated exterior which make them resistant to corrosion and chemical damage.

Specification:

•         Temperature Range: Ambient to 100°C

•         Flow rate steps: 2

•         Max. Pressure: 300 mbar

•         Pump type: Pressure type

•         Heating Capacity: 2kW

•         Temperature stability: 0.02°C

•         Bath Capacity in liters: 8-15 L

•         Temperature display selection feature in °C/°F/K.

Standards:

Additional Information:

• Item Code: GEC-P40616

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of PH meter is ideal instrument for determination of pH Value of any solution.  The measurement range is from 0 to 14 pH with a resolution of 0.01 ph.

Specification:

·         Read out :  3½ digits, Resolution  : pH: 0.01 MV

·         Measuring Range : pH: 0-14 pH MV: t± 1999

·         Accuracy: pH: ± 0.01pH mV: ± 1mVCompensation

·         Auto : 0 to 100ºC, Manual: 0 to 100ºC

·         Input Impedance : > 10¹³ ohms, Slope Control : 80 to 120%

·         Recorder Output : 0 to 10mV/pH   10mV/100mAdjustable

·         Sensor : Combined pH electrode

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Turbidity Meter is used for measuring ambient turbidity ranging from 0 to 1000 NTU. An imported versatile sensor is used together with digital circuitry to measure & displaying it on to the 3½ digit LEDS.

Specification:

•      Read out : 3½ digits

•      Detector : Photocell / Photodiode

•      Measuring Range : 0 to 1000 NTU

•      Resolution : 1 NTU

•      Accuracy: ±3% FS± 1digit

•      Sample System : 30 mm Clear Glass Test

•      Light Source : 6V Tungsten Lamp

•      Power Supply : 220/230 V single phase AC, 50 Hz

•      Power Consumption : 50 W

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Ford Cup is classic testing equipment widely used for the control of the kinematic viscosity of inks, resins, varnishes and any other liquid with Newtonian flow properties.  Kinematic viscosity is a measurable physic property form liquids and is caused by the internal friction between infinite microscopic layers present in fluids.

Specification:

·         For use in field or laboratory

·         Red Anodized handle for easy identification

·         ±3% Production Tolerance for cup #3, ±2% Production Tolerance for cup #4, ±3% Production Tolerance for cup #5

·         Cup #3 range extends from 29 to 251 centistokes, Cup #4 range extends from 34 to 441 centistokes, Cup #5 range extends from 77 to 1413 centistokes.

Additional Information:

• Item Code: GEC-P40501

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Sup plier of  Fiber Classifier Across Pan India.Fiber Classifier is designed for investigating the fiber length distribution in pulp. The Fiber Classifier segregates a fiber sample into groups of different lengths to allow the proportion of each group to be measured, by weight. Uniform operation is assured by a constant flow of water through the stainless steel inlet system.

Specification:

·         Flow Speed: 10 / 11.4 liter/min

·         Pulp: 10 & 20 g (oven dried)

·         Required time for screening: 20 min, RPM: 1400

·         Motor: 0.25 HP AC 3 Phase, Air Pressure: 0 - 6 Kg/cm2

·         Water Pressure: 11.4 liters per minute

·         Interchangeable screens will be given with wire of 16, 30, 50, 100 and 200 standard mesh.

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Hot Plate is used with Energy Regulator to accomplish various tasks & various

Specification:

Standards:

TAPPI T 218, T 428, 

Additional Information:

• Item Code: GEC-P40617