New Items

Product Details:

Box Compression Tester is a heavy-duty tester designed to determine the ability of Corrugated or Solid fiber shipping containers to resist external compressive forces during transit & storage.

 

Specification:

·         Capacity: 10 KN (1000 Kgf) to 50 KN (5000 Kgf),

·         Test Speed: 5 to 50 mm/min

·         Standard Press Platens. Admit between plates: 25mm ~ 1100mm

·         Accuracy: ± 1% of reading

·         Power Supply / Power Requirement: 3 phase, 440 volts, 50 Htz / 1 kW

Product Details:

Cobb tester determines the value of the absorption or Cobb value of the paper. Cobb value is the quantity of water in mgs absorbed by surface of 100 cm² of the specimen on one side only in a specified time under a specified head of water.

 

Specification:

·         Test area: 100 cm2

·         Level indication: Indication for 100ml on inside of cylinder

·         couch roll: Stainless steel roller having a smooth surface width 210mm(8’),  diameter 88mm (3.6”) weight 10kg +_05kg

Product Details:

GRAMMAGE tester measures basic weights of papers and other materials by measuring a small test sample with given dimensions. Weight of the specimen is directly displayed directly on digital panel meter. Specification:  Its measuring range is 0-1500 g/m2.  Auto calibration within +0.5% with auto zero adjustment  Display accuracy in 0.1 gram/m2 Standards: SCAN P6, TAPPI T- 410, ISO 536, CPPA D.3, APPITA - P – 405

Additional Information:

• Item Code: GEC-P40102-B

Product Details:

Product Details:

Fiber Classifier is designed for investigating the fiber length distribution in pulp. The Fiber Classifier segregates a fiber sample into groups of different lengths to allow the proportion of each group to be measured, by weight. Uniform operation is assured by a constant flow of water through the stainless steel inlet system.

Specification:

·         Flow Speed: 10 / 11.4 liter/min

·         Pulp: 10 & 20 g (oven dried)

·         Required time for screening: 20 min, RPM: 1400

·         Motor: 0.25 HP AC 3 Phase, Air Pressure: 0 - 6 Kg/cm2

·         Water Pressure: 11.4 liters per minute

·         Interchangeable screens will be given with wire of 16, 30, 50, 100 and 200 standard mesh.

Product Details:

Salt Spray (Fog) Tester has been designed to assess the ability of rust proofed components to withstand corrosion due to atmospheric conditions.

Specification:

·         Temperature Range: Ambient to 45^oC

·         Temperature Accuracy +/- 2^oC

·         Temperature Control: Solid State Digital Programmable Temperature Controller cum Indicator with special zero corrosion PT 100 Sensor

·         Air Regulator: A moisture cum oil filter and air regulator ranging from 0 to

30 psi is provided.

·         Construction: FRP–Fiber Reinforced Plastic

Additional Information:

• Item Code: GEC-P40421

Product Details:

Ford Cup is classic testing equipment widely used for the control of the kinematic viscosity of inks, resins, varnishes and any other liquid with Newtonian flow properties.  Kinematic viscosity is a measurable physic property form liquids and is caused by the internal friction between infinite microscopic layers present in fluids.

Specification:

·         For use in field or laboratory

·         Red Anodized handle for easy identification

·         ±3% Production Tolerance for cup #3, ±2% Production Tolerance for cup #4, ±3% Production Tolerance for cup #5

·         Cup #3 range extends from 29 to 251 centistokes, Cup #4 range extends from 34 to 441 centistokes, Cup #5 range extends from 77 to 1413 centistokes.

Additional Information:

• Item Code: GEC-P40501

Product Details:

Turbidity Meter is used for measuring ambient turbidity ranging from 0 to 1000 NTU. An imported versatile sensor is used together with digital circuitry to measure & displaying it on to the 3½ digit LEDS.

Specification:

•      Read out : 3½ digits

•      Detector : Photocell / Photodiode

•      Measuring Range : 0 to 1000 NTU

•      Resolution : 1 NTU

•      Accuracy: ±3% FS± 1digit

•      Sample System : 30 mm Clear Glass Test

•      Light Source : 6V Tungsten Lamp

•      Power Supply : 220/230 V single phase AC, 50 Hz

•      Power Consumption : 50 W

Product Details:

Internal Ply Bond Tester determines the internal bonding Strength of Paper, Paperboard and Laminates, by measuring the average energy in thousands of foot-pound required to delaminate the specimen in two piles.                            

Specification:

·         Security cover and Ball-striking head.

·         Measurement scale: 0 to 500 ft.lb

·         3 sets of washers for adjusting the adherence pressure of the sample.

·         5 metal blocks and 5 aluminum angles.

·         A pendulum of dual capacity 0-0.25 FT/LB and 0.1-0.5 FT/LB.

·         A scale calibrated in thousands of a foot pound in both ranges.

Additional Information:

• Item Code: GEC-P40111

Product Details:

Pulp Disintegrator allows a mechanical treatment of pulp in water so that interlaced fibers which were free in the pulp stock are again separated from one another without appreciably changing their structural properties. It is used for standardized disintegration of pulp to a homogeneous suspension.

Specification:

·         Capacity: 2 Liters

·         Rotational Frequency (Revolutions): 2975 ± 25 rpm

·         Motor: 0.5 KW, 3 Phase, 440V AC

·         Safety System: Double Safety System 

Product Details:

Puncture Resistance Tester is designed to measure the energy required to puncture corrugated board and therefore help assess the protective qualities of that board.  Resistance to puncture is defined as the energy required to force a puncture head of specific design through a test piece under clearly specified conditions.

Specification:

•      Sample Size: 175 * 175 mm

•      Clamping Force: Between 25 Kgf – 100 Kgf

•      Energy Range / Scale division: Kgf/cm or Nm / Kgf

•      Energy Range / Scale division: (0-58.5 / 0.2), (0-200 / 2), (0-400 / 5), (0-800 / 5), (0-1600 / 10)

•      Power Supply: 440 V, 3 Phase 50 Hz

Additional Information:

• Item Code: GEC-P40404

Product Details:

Lab Hydrapulper is used for making pulp, minerals fibers pulp like mica, asbestos etc. It is also used for mechno-chemical pulping.

 

Specification:

•      Container Capacity: 10 / 30 / 50 / 100 Liters

•      Consistency     : 5% maximum

•      Speed: 500 RPM

•      Motor: 5 HP 3 phase 440V AC

•      Power Supply: 440 V, AC 3 Phase

Product Details:

Hot Plate is used with Energy Regulator to accomplish various tasks & various

Specification:

Standards:

TAPPI T 218, T 428,

Additional Information:

• Item Code: GEC-P40617

Product Details:

Vacuum Pump is of oil immersed rotary van type, where not only complete assembly immersed in oil but shaft seal is also designed in such a way that it totally eliminates possibility of suction of air through it. It is designed to achieve maximum vacuum in a very short time.

Specification:

·         Drive: Direct drive with 10-15 HP motor having IP55 protection

·         Displacement: 250 m3 h -1 at 50 Hz (minimum)

·         Power requirements: 440V, 3 Phase, 50 Hz AC 

·         Ultimate vacuum: 1.0 x 10-3 mbar / 7.7 x 10-4 Torre (without gas ballast) or better, Noise Level: ≤ 75 dB

·         Outlet connection: ISO40 flange center tapped

·         Inlet connection: ISO63 blank flange with seal.

Standards:

ISO 3529/2

Additional Information:

• Item Code: GEC-P40618

Product Details:

Segmented ball valve is a ball sector valve with metal to metal or metal to PTFE seating. The segmented ball valve combines the best control characteristics of the ball valve and the butterfly valve.

 Specification:

·         SIZES: 25mm to 200mm

·         Working pressure: upto 10bar

·         Steps: 1,000

Gear Ratio: 1:400

Additional Information:

• Item Code: GEC-P40803

Product Details:

Additional Information:

• Item Code: GEC-P40906

Product Details:

Felt & Wire-Guides are designed to keep the felt fabric unning properly in the center of the roll over which it travels.pivotine one end of the guide roll in the proper direction corrects the fabric run. This guiding movement is based upon the principal that the fabric will always leave the guide roll perpendicular to its rotational axis.

Features:

•      All auto guides are custom designed to match specific bearing housing arrangement.

•      Low air consumption & maintenance free operation.

•      Minimum fraction time results in accurate tracking.

•      Returns to center position in the event of air supply failure. Exhibits high guiding power.

•      Suitable for machine speed upto 700 MPM

•      Imported bellows ensures performance reliability.

•      Can be installed horizontally or vertically and also at an inclination of 45°.

•      No air seal presents to ensure long service life.

•      Can be used in wet or dry location.

Very smooth running

Additional Information:

• Item Code: GEC-P40805