Packaging Testing Instruments

Product Details:

Torque Tester is used to test the opening torque of screwed caps and closures and the breaking strength of pilfer proof (ROPP) caps.

 

Specification:

·         Measuring Range: 50 Kg.cm

·         Least count: 0.01 Kg.cm

·         Power Supply: 220 V, 1 Phase 50 Hz

Additional Information:

• Item Code: GEC-P40414

Product Details:

We are one of the widely acclaimed manufacturers and suppliers of GANN Moisture Meter. The offered gann moisture meter is specially designed to monitor the moisture content in pulp and paper. Our supplied gann moisture meter is a versatile digital instrument which is used to get the percentage moisture content of samples. The manufactured gann moisture meter is available at very cost effective market rates.

Features:

• Automatic and easy operation
• Suitable for wood, gypsum and plaster
• Low maintenance

Other Details:

• Moisture Range: 5% to 80%

Additional Information:

• Item Code: GEC-P40116-B
• Delivery Time: Immediate
• Packaging Details: IN STANDARD QUALITY PACKING

Product Details:

In the short-span compression test (SCT) the compressive strength of paper in compression mode is determined. Because only a very short length of paper (0.7 mm) is used in the test, greater account is taken of the load-bearing fiber portion of the material than with the traditional test methods (ring crush test, corrugated crush test or linear crush test).

Specification:

·         Load cell range:  0-500N, GSM range:  100 to 400 g/m ²

·         Compression length: 0.5 mm, Test span: 0.7 mm

·         Clamping force: 2300 ± 500 N at 500 kPa (75 psi) air pressure.

·         Strip dimension: Length 150 mm and width 15 mm

·         Accuracy: ± 1% of reading within 30-300 N.

·         Computer output: RS 232 C

Additional Information:

• Item Code: GEC-P40121

Product Details:

The Carton Opening Pressure Tester, is a bench mounted, electrically operated machine. The machine is designed to measure the opening force of flat stacked cartons. The test determines force per unit width required to open a carton and the percentage deflection at that maximum point. The test is performed using the constant rate of force method.

Specification:

·         Travel: - Max. Height 300 mm

·          Travel: - Min. Height 25 mm

·          Load: - Max. Capacity 5,000 x 1g

Additional Information:

• Item Code: GEC-P40412

Product Details:

Drop Tester is used to determine the ability of fiber board containers to withstand vertical impact in free drops. The test may be performed as a single test or multiple test to determine and analyses the conditions that occur on a package during handling & transit. It serves as effective equipment for package design and performance analysis before production and use. Essential for quality control and development for consumers of corrugated and solid fiberboard, shipping containers, etc.

Specification:

•            Max. Size of the package: 600 x 600 x 600 mm

•            Max. Weight of test package: 75 kg

•            Drop Heights: 700 – 2000 mm

•            Drop heights interval:  75 mm

•            Floor Space:   1100 x 880 mm 

•            Required Height: 2450 mm

Product Details:

Top Load Tester is used for the measurement of the top load resistance of empty PET bottles and other empty containers. The device measures a container's maximum axial load capacity in Kgf. To perform the test, one PET bottle or other container is placed on the device table and slowly pressed against the upper pressure plate. The upper plate moves down.

Specifications:

·         Capacity: 100 kgf

·         Test speed: Variable

·         Standard pressure platens: 2 parallel(one fixed and one moveable with load cell)

·         Admit Between platens: 25mm to 600mm

·         Accuracy: ±1% of reading

·         Power supply: 220 V,50HZ,Single phase

Additional Information:

• Item Code: GEC-P40429
• Delivery Time: 3-4 WEEKS
• Packaging Details: Export Quality Standard Wooden Box

Product Details:

Brookfield Viscometer is classic testing equipment widely used for the measurement of the viscosity of inks, resins, varnishes and any other liquid with Newtonian flow properties.  It is used to predict a material's flow, spray, or pumping behavior by studying shear rate profiles.

Specification:

·         Temperature off-set capability to ±5°C

·         Senses and displays continuously

·         Viscosity (CP or MPa· s), Temperature (°C or °F) (OPTIONAL)

·         Torque measurement accuracy: 1% of full scale range

·         Repeatability: 0.2% of full scale range

·         Choice of 18 rotational speeds

Additional Information:

• Item Code: GEC-P40502

Product Details:

The Charpy impact testing holds the sample horizontally with the notch facing away from the pendulum.

Specification:

• Capacity : Up to 25.00 Joules.
• Release angle of pendulum: 150 degree.
• Range of four scales : 0-2.71 Joules, 0-5.42 Joules, 0-10.84 Joules, 0-21.68 Joules and 0-25.00 Joules.
• Minimum resolution on scale : 0.02 Joule, 0.05 Joule, 0.1 Joule, 0.2 Joule and 0.2 Joule respectively.
• Paint : Powder coated.
• Power : 230 Volts, 50 Hz, single phase.
• Direct display through microcontroller : Impact strength in joules/meter and kg-cm/cm.
• Graphic display and printout through PC : Impact energy Vs Angular displacement graph and numeric reports consisting of values for impact strength as per ASTM standard, ISO and IS standard in different units could be obtained by attaching a printer to the PC.

Additional Information:

• Item Code: GEC-P40419

Product Details:

Vacuum Leak Tester is designed to comply with International Quality Standards. It ensures a visual check when the integrity of the foiled cups are tested under a vacuum. A defined vacuum is generated in the chamber to measure integrity for the evaluation of the leak-proofness of the foil packaging to assure that the seals are intact.

Specifications:

·         Pressure: 0 – 600 mm/Hg

·         Least Count: 10mm/Hg

·         Size of the desiccators -150 mm, 300mm (Diameter)

·         Power 220V AC 50 Hz

Additional Information:

• Item Code: GEC-P40413

Product Details:

Crease & Board stiffness tester measures board Stiffness and crease recovery. It gives board manufacturers, printers and packing companies the ability to predict the ‘run ability’ of a sample board or finished carton before committing valuable materials or machine time.

Specification:

·         Range: 0-399 gram force

·         Display: Digital

·         Accuracy:      ± 2% of reading

·         Test Time:     15 seconds

·         Power Supply: 220 V AC/50 HZ I Phase

Product Details:

Abrasion Tester is designed to determine the wear and durability of paper and board, ceramics, plastic, textile, rubber, flooring, and painted lacquered and electroplated surfaces.

Specification:

•         Test Area:  100 cm

•         RPM: 70-75 per min

•         Type: Twin shaft with two platform

•         Abrasive wheel: Dia. 50 mm and 12.75 mm thick

•         Counter:  Predetermined 6 digit Digital revolution counters

•         Dead weight load:  250 & 500 gf

Standards:

TAPPI T476, DIN 53863/1, DIN 53109

Additional Information:

• Item Code: GEC-P40409

Product Details:

Carton Board Creaser is used for testing the reusability of carton board. The relationship between board stiffness and crease recovery (spring back) is an important factor in the performance of cartons.  Board stiffness is determined by bending a 50mm (2 in.) length of board through a 15o angle.  Crease recovery is determined by holding a formed crease at 90 and measuring the recovery force after 15 seconds.

Specification:

•         Board caliper range: 300-1000 Micron (0.012-0.040 inch)

•         No. of Channels: 18 creasing channels between 1 –4.06 mm (0.04-0.016 inch)

•         Crease Depth: Variable

•         Creasing rules: 2PT, 3PT and 4 PT upper chase

•         Grooves width: 0.055, 0.075, 0.095 inches

•         Width of rules setting: 0.028, 0.042 and 0.056

•         Pressing action: Press ram, forward or backward stroke

•         Power Requirement: 0.5 kW 1 Phase, 50 Hz

Additional Information:

• Item Code: GEC-P40407

Product Details:

Vibration Tester is carried out to assess the performance of a filled package in terms of its strength or protection that it offers to its contents when subjected to vibration. This test method simulates the transport hazards, to produce an equivalent effect or damage during the test.

Specification:

·         Floor Space Requirement: 1200mm x1500mm (Machine) / 450mm x 450mm (Panel)

·         Table Size: 1000 mm x 1000 mm

·         Test sample weight: 50 kg (Maximum)

·         Railing Guard  Height: 300 mm

·         Table: Wooden (Laminated)

·         Amplitude: Fixed 25 mm

·         Frequency: Variable 100 rpm to 400 rpm (1.6 Hz to 666Hz)

·         Vibrations: Harmonious : In phase - out of phase (90° & 180°) Random

·         Electric Motor: 1 kW, 3 Phase, 750 rpm

·         Power  Requirement: 1.5 kW 3 Phase+ Neutral

Product Details:

Dart Impact Tester is used to determine the strength of the packaging material. The instrument consist of a dart placed above the base. It is released on the sample and if it fails to break, new height is determined. It is useful in packaging industry.

Specification:

•         A two piece annular specimen clamp having an inside diameter of 127mm.

•         Electromagnet withstand 2 Kg. weight.

•         Position device is built in two parts. One is for 22cms and 66cms and another is suitable up to 152.4cm

Additional Information:

• Item Code: GEC-P420

Product Details:

Ink proofing kit provides a fast, inexpensive method for making an accurate color proof for whatever purpose the printer or ink maker may need. Provide an inexpensive fool proof method of checking ink color and strength for the ink maker and printer.

The kit consists of: a smooth flat plate, a steel measuring bar and plunger for obtaining an accurate predetermined volume of ink, a steel spatula for filling the measuring bar and pipe cleaners for cleaning the holes in the measuring bar.

Product Details:

Caliper Thickness Gauge is an ideal instrument for measuring caliper thickness of LDPE bags, Paper, Paperboard, Corrugated Board, Plastics etc.

 

Specification: 

Model I                                                                                                  

·         Capacity: 0-10 mm                                                                              

·         Least Count: 0.01 mm        

Model II                                

·         Least Count: .001 mm

·         Capacity: 0-10 mm

Additional Information:

• Item Code: GEC-P40107-G
• Delivery Time: Immediate
• Packaging Details: IN EXPORT QUALITY STANDARD PACKING

Product Details:

Collapsing strength tester is designed in such a manner that gradually increasing force is generated & applied on the surface of carriers. The sharp collapsing point can be easily detected on a dial and a suitable reading can be taken.

Specification:

·         Capacity: 1000 Kgf 

·         Least Count: 9.15

·         Accuracy:2% of full scale

·         Test Adopters OD:       Upto 100 mm

Air Pressure: 6 Kg/cm2

Additional Information:

• Item Code: GEC-P40402
• Delivery Time: 3-4 WEEKS

Product Details:

Concura Medium Flutter is used to determine the flat crush resistance/CMT value of a packaging or similar grade of paper. Specification:

·         Flute Type : ‘B’ Flute Rolls

·         Flute Rolls :Two

·         Revolutions of Flute Rolls :4.0 per min

·         Force between Rolls  :Spring loaded force adjustable to 10 Kgf ± 1

·         Number of teeth :84

·         Depth of teeth :4.75 mm

·         Temperature: Adjustable and Thermostatically controlled upto 1800C

·         Power Supply :440 V,3 Phase 50 Hz

Additional Information:

• Item Code: GEC-P40403

Product Details:

This tester is used for determining the capacity of paper and board for absorbing Printing Ink. The percentage change in the reflectance value of the K & N Ink. The time for penetration and drying and the pressure, speed and material have been determined in the method for the K & N Tester, thus ensuring a high level of accuracy and reproducibility.

The K & N tester can also be used for determine the drying time of printing ink, the penetration depth of printing inks by means of repeated abrasion, the resistance of the paper to abrasion, the resistance of the paper to abrasion.

Standards:

Scan-P 70:95,ISO 187,ISO 2471 & ISO 2469

Additional Information:

• Item Code: GEC-P40704