Product Details:
Minimum Order Quantity | 1 Piece |
Frequency | 50 Hz |
Power Source | 220V AC |
Type | ELECTRONIC |
Voltage | 220 V |
Country of Origin | Made in India |
Thickness | 0.004 |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Stiffness Tester (Electronic Type) is easy to handle calibrate. It is fast and efficient for paperboard and intended for determining the bending resistance of a wide range of paper grades. The instrument can also be used for determination of the behavior of paper under long-term stress as well as to determine the bending stiffness.
Specification:
· Test Material Thickness: 0.004 to 1/8 of an inch, Pendulum: Two Directional.
· Bending angle: Infinitely variable 5° & 30° and six fixed positions 5°, 7.5°, 15°, 20°, 25° and 30°.
· Bending Length: 5, 10, 15, 20, 15 & 50 mm, Bending Speed: 5°/s, Strip Dimensions: Width 38 mm (15')
· Thickness max 3 mm, measuring range: 0-5000 MN.
· Accuracy: ≤ ± 2 % of reading but not better than ± 1% of load range, Analog Output: 0-10 V.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | GEC |
Country of Origin | Made in India |
Height | 62MM+ 0.2mm |
length | 50 + 2.0mm |
TYPE | ANALOG |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Tearing Resistance Tester tests the tear force required to tear samples of paper, film, board and other sheet materials. The equipment is designed to directly read the TF (Tear Force) per one piece. The instrument scale is calibrated to indicate the average force exerted when a certain number of piles are torn together.
Specification:
· Easy to operate and has high accuracy level ± 1% of readout value and reliability.
· Height: 62mm + 0.2mm, length: 50 + 2.0mm.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Display Type | Analog |
Voltage | 220VOLT |
Brand | GEC |
Frequency | 50HZ |
Country of Origin | Made in India |
TYPE | DOUBLE HEAD MANUAL CLAMPING |
USE | PAPER & BOARD |
Pressure Speed | FOR PAPER: 95 +- 5 ml/min, FOR BOARD: 170 +- 15ml/min. |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Bursting Strength Tester measures Bursting Strength of strong paper and other similar materials by submitting it to increasing uniform hydraulic pressure.
Specification:
Paper
· Specimen Clamp-Upper Part: 30.50 mm
· Specimen Clamp-Lower Part: 33.10 mm
· Pressure Speed: 95 ± 5 ml/min
· Motor: 150W, 220V AC Single Phase.
Solid Fiber Board/Corrugated Board
· Specimen Clamp-Upper Part: 31.15 mm
· Specimen Clamp-Lower Part: 31.15 mm ± 0.1mm.
· Pressure Speed: For paper: 170 ± 15ml/min.
· Motor: 150W, 220V AC Single Phase.
Additional Information:
Product Details:
Brand | GEC |
Country of Origin | Made in India |
POWER SUPPLY | Single Phase 220 V, 50 Hz. |
Measuring Units: | MN/gram force. |
Power consumption | 50 W. |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Tearing Resistance Tester tests the tear force required to tear samples of paper, film, board and other sheet materials. The equipment is designed to directly read the TF (Tear Force) per one piece. Automatic calculations are done through microprocessors and presentation of measured value to ensure accurate and stable results.
Specification:
· Measuring Units: MN/gram force.
· Power consumption: 50 W.
Power supply: Single Phase 220 V, 50 HzAdditional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Type | DIGITAL |
Brand | GEC |
Usage/Application | PAPER & OIL MILLS |
Country of Origin | Made in India |
Temperature Range | Ambient to 1000C |
Penetration Timer | 999 second with 0.1 second |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Oil Penetration Tester is designed for determining the penetration time of oil and other liquids through paper and other similar materials by the Surface Resistance.
Specification:
· Temperature Range: Ambient to 1000C
· Penetration Timer: 999 second with 0.1 second
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | GEC |
Country of Origin | Made in India |
DISPLAY | Impulse counter with five figure counters and zero setting |
Folding Angle | 312 Degree |
Folding Speed: | 200 +- 10 double folds/min |
Dimension of Test Strip | 15 x 100 mm |
It determines the Folding Endurance of all kinds of paper card board, foil and film and is applicable to the paper up to 0.15 mm in thickness having a tensile strength greater than 1.3 kn/m. Two test samples can be tested simultaneously. The numbers of folds are stored into the counter.
Specification:
· Display: Impulse counter with five figure counters and zero setting
· Folding Angle: 312°
· Folding Speed: 200 ± 10 double folds/min
· Dimension of Test Strip: 15 x 100 mm
· Power Supply/Consumption: 220 / 240 V Single Phase 50 Hz. / 50 W
Additional Information:
Product Details:
Display Type | Digital |
Brand | GLOBAL ENGINEERING CORPORATION |
Frequency | 50HZ |
Country of Origin | Made in India |
CLAMPING | PNEUMATIC |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Bursting Strength Tester measures Bursting Strength of strong Paper, Solid Fiberboard, Corrugated Board, Film, Tissue, Nonwovens, Textiles, Geotextiles, Tobacco Leaf and other similar materials by submitting it to increasing uniform hydraulic pressure.
Specification:
For Paper Model
· Specimen Clamp-Upper Part: 30.50 mm
· Specimen Clamp-Lower Part: 33.10 mm
· Pressure Speed: 95 ± 5 ml/min
For Solid Fiber Board/Corrugated Board
· Specimen Clamp-Upper Part: 31.15 mm
· Specimen Clamp-Lower Part: 31.15 mm ± 0.1mm.
· Pressure Speed: For paper: 170 ± 15ml/min.
Additional Information:
Product Details:
Display Type | Digital |
Voltage | 220VOLT |
Brand | GLOBAL ENGINEERING CORPORATION |
Country of Origin | Made in India |
CLAMPING | PNEUMATIC |
HEAD | DOUBLE HEAD MODEL |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Bursting Strength Tester measures Bursting Strength of strong Paper, Solid Fiberboard, Corrugated Board, Film, Tissue, Nonwovens, Textiles, Geotextiles, Tobacco Leaf and other similar materials by submitting it to increasing uniform hydraulic pressure.
Specification:
Paper
· Specimen Clamp-Upper Part: 30.50 mm
· Specimen Clamp-Lower Part: 33.10 mm
· Pressure Speed: 95 ± 5 ml/min
Solid Fiber Board/Corrugated Board
· Specimen Clamp-Upper Part: 31.15 mm
· Specimen Clamp-Lower Part: 31.15 mm ± 0.1mm.
· Pressure Speed: For paper: 170 ± 15ml/min.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | GEC |
Country of Origin | Made in India |
Measurement scale | 0 to 500 ft.lb. |
NO OF METAL BLOCKS | 5 |
NO OF ANGLES | 5 |
A pendulum of dual capacity | -0.25 FT/LB and 0.1-0.5 FT/LB. |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Internal Ply Bond Tester determines the internal bonding Strength of Paper, Paperboard and Laminates, by measuring the average energy in thousands of foot-pound required to delaminate the specimen in two piles.
Specification:
· Security cover and Ball-striking head.
· Measurement scale: 0 to 500 ft.lb.
· 3 sets of washers for adjusting the adherence pressure of the sample.
· 5 metal blocks and 5 aluminum angles.
· Tape-support, double coated adhesive tape and manual cutting tool.
· A pendulum of dual capacity 0-0.25 FT/LB and 0.1-0.5 FT/LB.
· A scale calibrated in thousands of a foot-pound in both ranges.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | aqueous or non-aqueous, fluids, oils, varnishes) |
Brand | GEC |
Country of Origin | Made in India |
Reservoir Capacity | 250 cm2 |
Testing Surface | 100 cm |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Paper Surface Oil Absorbency Tester is used for determining the absorptive capacity of paper by measuring the amount of fluid (aqueous or non-aqueous, fluids, oils, varnishes) absorbed by the paper surface.
Specification:
· Reservoir Capacity: 250 cm2
· Testing Surface: 100 cm
Additional Information:
Product Details:
Power Source | Electrical |
Waste Type | Ash |
I Deal In | New Only |
Energy Consumption | 180-200 Watts |
Minimum Order Quantity | 1 |
Frequency | 50HZ |
Model Name/Number | GEC-P40106 |
Country of Origin | Made in India |
This determines the ash content in the paper and other sheet materials. It is used for quick incineration (machine for burning rubbish) of paper samples. One piece of paper is weight on a balance and given into the ceramic part of the ashes. The paper burns and the ash remains in the tube. The ashes is mover to the balance and the ash is poured-out on the balance-table and weight back.
Specification:
· Power supply: 220 V AC. Single Phase
· Power consumption: 180-200 Watts
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | GEC |
Country of Origin | Made in India |
Testing of Paper | 0.25 mm thickness of paper |
Specimen width | 15MM |
length: | 98MM |
Clamping length | 90MM |
Stretching force | Maximum 9.81 N and Minimum 7.55 N |
Working speed: | 120 strokes /min, Deflection on either side: 10 mm. |
It determines folding endurance for all kinds of paper, cardboard, foil & films up to 0.25 mm & estimates suitability of paper in use to withstand repeated bending folding & creasing.
Specification:
· Working Unit: Two separately working folding units for quicker test
· Testing of Paper: 0.25 mm thickness of paper
· Specimen width: 15 mm, length: 98 mm, Clamping length: 90 mm
· Stretching force: Maximum 9.81 N and Minimum 7.55 N
· Folding Roll Diameter: 6 mm, Distance Between folding rolls: 0.5 mm
Working speed: 120 strokes /min, Deflection on either side: 10 mmAdditional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Brand | GEC |
Country of Origin | Made in India |
POWER SUPPLY | 115 Volts 60 Hz |
Maximum Temperature | >180oF (82oC) |
Volume | 750 ml |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Water Drop Tester measures the angle of contact, oil wetting agent & size for corrugated fiber Board when a drop of liquid is applied to the surface of a specimen of paper. Contact angle measurements can be used as a tool for understanding the wetting between a liquid droplet and a substrate. Projection screen of matt glass 160x90mm magnification 25 X is provided.
Specification:
Power: 115 VoltsAdditional Information:
Product Details:
Display Type | Digital |
Brand | GLOBAL ENGINEERING CORPORATION |
Frequency | 50HZ |
Country of Origin | Made in India |
POWER SUPPLY | 220 / 240 V Single Phase 50 Hz. / 50 W |
Measuring Range | 0-300ml/min and 0-3000ml/min |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Smoothness, Porosity & Softness Tester (Microcontroller Model) is a fast and reliable instrument for accurate measurement of surface smoothness and roughness of paper grades. The equipment is supplied with advanced high precision Brooks, U.S.A Mass Flow Meters, which offers remarkably accurate measurement even at small flows. Each result is presented on digital display and documented on the built in printer.
Specification:
· Measuring Range: 0-300ml/min and 0-3000ml/min
· Measuring results: Individual values/Mean values
· Contact Pressure: 98 Kpa
· Air Pressure: 1.47 kPa, Measuring Area: 10 cm2
· Display: Digital with backlit LCD
· Accessories Included: Air Permeance & surface roughness/smoothness measuring Head, Ground glass plate, Additional hardness weight and Sample Holder
· Power Supply/Consumption: 220 / 240 V Single Phase 50 Hz. / 50 W
· Compressed Air: 400 kPa
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Country of Origin | Made in India |
Inclined plane | 500 X 100 mm with a 4.5 degree gradient with Neoprene. |
Roller | 2.1 Kg, 76 mm diameter and 55 mm wide lined. |
POWER SUPPLY | 220V |
DISPLAY | DIGITAL |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Surface Oil Absorbency Tester - PATRA Type
It is used to determine the oil absorption resistance of the surface of paper and paperboard along with photo electric digital timer.
Specification:
· Roller 2.1 Kg, 76 mm diameter and 55 mm wide lined.
· Inclined plane 500 X 100 mm with a 4.5 degree gradient with Neoprene.
· 50 CC Paraffin oil with density of 0.88 and viscosity of 1.28 poise at 25°C.
· Oil-burette delivers 0.02G oil droplet.
· 10 scale division = 0.0015 ml.
Additional Information:
Product Details:
Brand | GLOBAL ENGINEERING CORPORATION |
Country of Origin | Made in India |
Effective area of Porosity | 645.16 mm2 |
Contact area of smoothness | 645.16 mm2 |
Contact Pressure smoothness: | 0.21 Kg/cm2 |
Softness contact area: | 645.16 mm2 |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Smoothness, Porosity & Softness Tester measures average Smoothness, Porosity and Softness of paper and films by determining the time necessary for a certain volume of air to flow through the inserted sample, under a uniform pressure.
Specification:
· Effective area of Porosity: 645.16 mm2
· Contact area of smoothness: 645.16 mm²
· Contact Pressure smoothness: 0.21 Kg/cm²
· Softness contact area: 645.16 mm²
· Steel Plug - Height approx.: 5/100 mm (100cc of air flows out in 10 sec.)
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Automation Grade | Automatic |
Model Name/Number | GEC-P40108-C |
Display Type | 4 line Character LCD Green |
Light Source | Quartz Tungsten Halogen Lamps |
Measurement Value | 5, 00,000 |
Dimension | 30 mm dia |
It measures brightness, opacity and other parameters by diffused reflectance according to relevant ISO standards. It is Microprocessor based and gives out instantaneous digital read printout, that shows the worked out details such as CIE Tristimulus values, yellowness, whiteness and colors values of pulp, paper, paperboard, coating agents, filler and other similar materials according to International Standards.
Specification:
· Specimen Area Measured: 30 mm dia.
· Light Source: Quartz Tungsten Halogen Lamps
· Flashes per measurement: 4.0, Lamp Life (No. of measurements): 5, 00,000
· Geometry: Dual Beam / CIE 2º, Photometric Non-Linearity: 0.1%
· Measurement Time: 4 seconds, Illuminator: C Type
· Color Scales: X, Y, Z; R(X), R(Y), R (Z), LUM. X, y, z, Whiteness: ASTM / CIE, Yellowness: ASTM
· Display: 4 line Character LCD Green
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | 38 X 70 mm (15 X 2.75 inch) for bending distance of 5 cm. 38 X 38 mm (15 X 15 inch) for bending dist |
Accuracy | +-1% full scale in each range. |
Display | 3-1/2 digits. |
Frequency | 50 Hz |
Measuring Range | 0-10,000-stiffness unit. |
Power Source | 220V AC, 2 rpm |
Country of Origin | Made in India |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Stiffness Tester is designed to evaluate stiffness of paper, plastics, cardboard and other flexible material having comparatively strong bending resistance. One end of the test piece is fastened to the clamp. The maximum force required to bend the test piece to a specific angle is presented on the graduated scale.
Specification:
· Test Range: 0-10,000-stiffness unit.
· Test Material Thickness: 0.004 to 1/8 of an inch.
· (if within load range of instrument)
· Pendulum: Two Directional.
· Specimen Size: 38 X 70 mm (15 X 2.75 inch) for bending distance of 5 cm. 38 X 38 mm (15 X 15 inch) for bending distance of 1 cm.
· Load: 5000 unit at 15 degree (standard bending).
· 10000 unit at 7.5 degree (standard bending).
· Roll Diameter: 10.5 mm and 11 mm factory calibrated.
· Accuracy of ±1% full scale in each range.
· Display: 3-1/2 digits.
· Transducer: Angle of rotations measure by imported shaft encoder.
· Drive: By small gear motor rated for 220V AC, 2 rpm, 50 Hz electrical components sealed in housing.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Material | Aluminium |
Model Name/Number | GEC-P40101 |
Type | ANALOG |
Meas | 0-1000 g/m2 |
Quantity Per Box | 1 |
Country of Origin | Made in India |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Quadrant Scale measures the Basis Weight of paper by weighing small test samples with given dimensions. Scales are calibrated to precision dead weights.
Specification:
· Its measuring range is 0-1000 g/m2.
· Its radius is 30/50 cm.
· Graduation: 0.5-5 g/m2
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Frequency | 50HZ |
Voltage | 220V |
Brand | GLOBAL ENGINEERING CORPORATION |
Country of Origin | Made in India |
measuring range | 0-1500 g/m2. |
Display accuracy | 0.1 gram/m2 |
Additional Information:
Product Details:
Display Type | Analog |
Brand | GLOBAL ENGINEERING CORPORATION |
Frequency | 50HZ |
Country of Origin | Made in India |
Three rotameter tubes | 5-150 & 50-500 ml/min. |
Contact Pressure | 98 Kpa. |
Air Pressure | 3 Manostat weights of constant pressure (0.75 & 1.5 Kpa). |
POWER SUPPLY | 220 / 240 V Single Phase 50 Hz. / 50 W. |
Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Smoothness, Porosity & Softness Tester is an advanced instrument based on rotameter airflow principle for measuring the smoothness, porosity, softness and air presence of paper and board using the Bendtsen method. Roughness of paper or similar material is defined as the volume of air that forced by a specified pressure difference escapes in unit time by passing between the surface of the specimen and flat metal ring resting on a specimen.
Specification:
· Three rotameter tubes: 5-150 & 50-500 ml/min.
· Contact Pressure: 98 Kpa.
· Air Pressure: 3 Manostat weights of constant pressure (0.75 & 1.5 Kpa).
· Power Supply/Consumption: 220 / 240 V Single Phase 50 Hz. / 50 W.
Standards:
Additional Information: