Pulp Property Testing Instrument

Product Details:

Measures the Canadian freeness number which is a measure of the drainage capacity of different pulp types. The drainage rate has been shown to be related to surface conditions and swelling of the fibers. It is also useful index of the amount of mechanical treatment given to the pulp.

Specification:

·         Capacity of the cylinder: 1000 ml

·         Volume in the bottom section of the cone: 23.5 ± 0.2 ml 

·         Slope of the main cone: 29° ± 5 min

·         Orifices provided in funnel: two, one at the bottom & other on the side

·         Distance between the overflow lip of the tube and bottom of the funnel section: 50.8 mm ± 0.75mm 

·         Size of the perforation in the screen plate: 0.50 mm diameter

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Beating & Freeness Tester is designed to determine the rate of drainage of a dilute pulp suspension and express it in terms of the Schopper - Riegler (°SR) value. The °SR value is the inverse of the volume of water collected (divided by 10). The rate of drainage is related to the work done on the fiber during beating and refining.

Specification:

•      Sample:  2 gm. Oven dried

•      Consistency: 0.2%

•      Reproducibility:  approximately 1 ⁰SR

Additional Information:

• Delivery Time: 3-4 WEEKS

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Hand Sheet Former (GEC-P40303-D) is a Hand Sheet Former with White Water Re-Circulation System, Pneumatic Sheet Press and Rapid Dryer mounted on base table complete with accessories.

Specification:

·         Apparatus has control Cabinet for regulation of filling, air agitation, settling and drainage.

·         Complete with switch control box accessories to provide 600 KPA air supply to the sheet former.

·         Timer provides timing sequence of each steps may be adjustable in seconds, minutes and hour.

·         On completion of pneumatic couching, controls reset for next cycle.

·         It is suitable for operation on 220-250 V 50 Hz AC.

Additional Information:

• Item Code: GEC-P40303-D

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Hand Sheet Former is a stainless steel device produces laboratory sheets to allow the test and evaluation of the physical properties of pulp. Laboratory sheets are used in determining physical properties such as apparent density, tensile index, tear index, folding endurance light scattering coefficient and air resistance.

Specification:

•      Sheet Size:  165 X 165 mm

•      Trimmed Size: 200 cm²

•      Wire Screen (upper): 100 mesh (ASTM std.) 150 mesh (TAPPI STD.)

•      Wire Screen (support): 20 mesh

•      Suction Height:  800 mm

•      Stock Container and dewatering vessel: Stainless Steel

Additional Information:

• Item Code: GECP40303-A

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Flotation Cell

It is used to study dinking effect of printed recycled paper by floatation method technology. It has Stainless steel container capacity of 10/25 liter with specially designed Aerator with Variable Speed & Digital Revolution Counter. It may be used in conjunction with Laboratory Pulper and Screw Press to conduct extensive testing of recycled fiber system. It is based on Lamort Type Original Kowaleswski Flotation cell method.

Specification:

·         Container Capacity: 10/25 Liter Stainless Steel Container with Outlet Valve

·         Revolution Counter: 6 Digit Revolution Counter

·         Drive: DC Variable Drive

·         Power Supply: 220 Single Phase, 50HZ, 200 W

Additional Information:

• Item Code: GEC-P40316

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Auto vat is used for quick preparation of Hand Made Pulp Sheets. The Deckle with frame is submerged in the water filled tank, through a mechanism connected with the foot paddle to form the pulp sheets on the frame fitted with a mesh screen. After forming the pulp sheet, the Deckle is lifted using foot paddle and the frame containing the pulp sheet is removed. The sheet is then transferred to the Muslin Cloth for De-Watering &Uniform Pressing. 

•         PROVIDED WITH WOODEN FRAME &

Additional Information:

• Production Capacity: 5
• Delivery Time: 10-15 WEEKS
• Packaging Details: WOODEN STANDARD PACKAGING

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Lab Scale Chipper is used for preparation of chips from wood, bamboo & other similar material for lab & educational purposes. Input tube diameter 80 mm set at and angle of about 50⁰.Capacity max 500 Kg/h chips. Chipping disc 350 mm diameter, speed 700 rpm.

Specification:

·         Quality of chips corresponds closely to that of the factory chips

·         Three chipping Knives of special Steel

·         Input Tube diameter 80 mm set at an angle of about 500

·         Adjustable Counter cutter

·         Quality of chips corresponds closely to that of the factory chips

Additional Information:

• Item Code: GEC-P40317

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Shieves Analyzer (Somerville Type) A known volume of pulp in aqueous suspension is drained through the screen plate of standard slits to separate fiber and contaminate is based on size difference between them. The accept material on the surface of the screen plate may be used for observation or quantification. For determining the shieve content in pulp.

Specification:

·         Rectangular Brass Screen Plate : 305 *254 mm

·         Screen Slits : Length 45 mm, Width : 0.15 mm ± 0.05

·         Number of Slits : 404 in 4 row

·         Rubber Diaphgram actuation: 3.2 ± 0.1 mm

·         Flow Rate : 8.6 litre/min

Standards:

TAPPI 275 sp-12.

Additional Information:

• Item Code: GEC-P40318

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Consistency Determination Apparatus offers a simple and rapid method of determining the consistency of a pulp suspension in freeness tests. It is more rapid than Bücher funnel and is suitable for use with most types of pulp. The equipment is manufactured in accordance with the second report of the Pulp Evaluation Committee to the Technical Section of British Paper & Board Industry Federation.

Specification:

·         Capacity: 1000 ml

·         Container: Top easily removable

·         Clamping: Rapid action & efficient

·         Grid Plate: Fitted with a supporting lattice

Standards:

Additional Information:

• Item Code: GEC-P40302

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Sheet Drying Cylinder is used for drying the lab pulp hand sheets or paper samples as per commercial production in laboratory. The process helps to prevent wrinkling and shrinkage in the dried samples. It also permits convenient and rapid insertion of the sheets.

Specification:

•         Drum Diameter: 500 / 800 mm (Manually/ Motorized)

•         Drum Width: 600 / 700 mm (Manually/ Motorized)

•         Fan Moto: 0.1 HP, Heater Capacity: 2 KW, 220 V AC

•         Rotating Speed: 5 R.P.M.

•         Working Surface Temperature: 60 ºC

Additional Information:

• Item Code: GEC-P40307
• Production Capacity: 10
• Delivery Time: 10-12 WEEKS
• Packaging Details: WOODEN STANDARD EXPORT PACKING

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Research Digester is a complete pulping unit for producing pulps by cooking wood chips in a manner similar to a commercial digester.

Specification:

·         Capacity : 20 Liter Capacity

·         Digester Body : SS 316 Acid Proof Stainless Steel

·         Temp : 0- 2000  ± 80 C PID Type digital Programmable Temperature Indicator cum Controller

·         Max. Pressure : 20.0 Kg./cm2

·         Pump Capacity : 20 Liters/min

·         Motor: 2 HP, 440 V, 50 c/s

Standards:

Product Details:

Global Engineering Corporation is one of the Leading Manufacturer and Supplier of Laboratory Valley Beater is used to beat pulp in a uniform, standard and reproducible way to determine the behavior of pulp in laboratory. Beating is a preliminary step to the testing of the physical properties of the pulp. 

Specification:

·         Beater roll drum speed:  500 rpm

·         Width of the bed plate:  159 mm

·         Number of bed plate bars:  7 bars, each 3.2 mm thick set in lead 2.4mm apart

·         Thickness of fly bar:  4.8 mm

Additional Information:

• Item Code: GEC-P40313
• Production Capacity: 5
• Delivery Time: 10-12 WEEKS
• Packaging Details: WOODEN STANDARD PACKING